How to Replace Ink Cartridges on your Canon PIXMA MX922 Inkjet PrinterMarch 12, 2016 No Comments
This guide shows how to replace the ink cartridges in the Canon PIXMA MX922 inkjet printer when it runs out of ink. This printer uses 4-color ink cartridges with model nos. CLI-251. In getting replacement ink cartridges, be sure to know the correct model number of the cartridge. Otherwise, check out the manual that came with the printer.
Step 1 – Make sure that the printer is turned on. Open the top cover and the ink cover. Wait until the ink holder stops at the ink tank installation position then remove the ink cartridges.
Step 2 – Peel off the plastic sheet from the ink cartridge. Make sure to completely remove the orange film from the Y-shaped air slit.
Step 3 – Remove the orange cap. Do not touch the ink chip and part where you removed the cap.
Step 4 – Insert the ink cartridge and gently press it until it clicks into place. Install the other cartridge the same way. Make sure you match the cartridge color to the color slot on the printer.
Step 5 – Confirm that all the lights turn on.
Step 6 – Close the ink cover and top cover.
The printer will then initialize and detect the new ink cartridges installed. Do a test print and you’re good to go!
TonerBoss offers low-priced compatible replacement Canon CLI-251XL ink cartridges for the Canon MX922 printer. These high capacity inkjet cartridges can yield up to 500 pages for black, and 660 pages for each color. Guaranteed to work with your printer and also for the following compatible printers: iP7220, PIXMA MG5420, PIXMA MG6320, PIXMA MX722. Shop now at www.TonerBoss.com or call us now at 1-877-212-3809 to place your order.
Fatal error: Call to undefined function wp_related_posts() in /home/content/t/o/n/tonerboss/html/wp-content/themes/mymag/single.php on line 24